diff --git a/authentik/database/pg_hba.conf b/authentik/database/pg_hba.conf new file mode 100644 index 0000000..7f379db --- /dev/null +++ b/authentik/database/pg_hba.conf @@ -0,0 +1,128 @@ +# PostgreSQL Client Authentication Configuration File +# =================================================== +# +# Refer to the "Client Authentication" section in the PostgreSQL +# documentation for a complete description of this file. A short +# synopsis follows. +# +# ---------------------- +# Authentication Records +# ---------------------- +# +# This file controls: which hosts are allowed to connect, how clients +# are authenticated, which PostgreSQL user names they can use, which +# databases they can access. Records take one of these forms: +# +# local DATABASE USER METHOD [OPTIONS] +# host DATABASE USER ADDRESS METHOD [OPTIONS] +# hostssl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostgssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnogssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# +# (The uppercase items must be replaced by actual values.) +# +# The first field is the connection type: +# - "local" is a Unix-domain socket +# - "host" is a TCP/IP socket (encrypted or not) +# - "hostssl" is a TCP/IP socket that is SSL-encrypted +# - "hostnossl" is a TCP/IP socket that is not SSL-encrypted +# - "hostgssenc" is a TCP/IP socket that is GSSAPI-encrypted +# - "hostnogssenc" is a TCP/IP socket that is not GSSAPI-encrypted +# +# DATABASE can be "all", "sameuser", "samerole", "replication", a +# database name, a regular expression (if it starts with a slash (/)) +# or a comma-separated list thereof. The "all" keyword does not match +# "replication". Access to replication must be enabled in a separate +# record (see example below). +# +# USER can be "all", a user name, a group name prefixed with "+", a +# regular expression (if it starts with a slash (/)) or a comma-separated +# list thereof. In both the DATABASE and USER fields you can also write +# a file name prefixed with "@" to include names from a separate file. +# +# ADDRESS specifies the set of hosts the record matches. It can be a +# host name, or it is made up of an IP address and a CIDR mask that is +# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that +# specifies the number of significant bits in the mask. A host name +# that starts with a dot (.) matches a suffix of the actual host name. +# Alternatively, you can write an IP address and netmask in separate +# columns to specify the set of hosts. Instead of a CIDR-address, you +# can write "samehost" to match any of the server's own IP addresses, +# or "samenet" to match any address in any subnet that the server is +# directly connected to. +# +# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256", +# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert". +# Note that "password" sends passwords in clear text; "md5" or +# "scram-sha-256" are preferred since they send encrypted passwords. +# +# OPTIONS are a set of options for the authentication in the format +# NAME=VALUE. The available options depend on the different +# authentication methods -- refer to the "Client Authentication" +# section in the documentation for a list of which options are +# available for which authentication methods. +# +# Database and user names containing spaces, commas, quotes and other +# special characters must be quoted. Quoting one of the keywords +# "all", "sameuser", "samerole" or "replication" makes the name lose +# its special character, and just match a database or username with +# that name. +# +# --------------- +# Include Records +# --------------- +# +# This file allows the inclusion of external files or directories holding +# more records, using the following keywords: +# +# include FILE +# include_if_exists FILE +# include_dir DIRECTORY +# +# FILE is the file name to include, and DIR is the directory name containing +# the file(s) to include. Any file in a directory will be loaded if suffixed +# with ".conf". The files of a directory are ordered by name. +# include_if_exists ignores missing files. FILE and DIRECTORY can be +# specified as a relative or an absolute path, and can be double-quoted if +# they contain spaces. +# +# ------------- +# Miscellaneous +# ------------- +# +# This file is read on server startup and when the server receives a +# SIGHUP signal. If you edit the file on a running system, you have to +# SIGHUP the server for the changes to take effect, run "pg_ctl reload", +# or execute "SELECT pg_reload_conf()". +# +# ---------------------------------- +# Put your actual configuration here +# ---------------------------------- +# +# If you want to allow non-local connections, you need to add more +# "host" records. In that case you will also need to make PostgreSQL +# listen on a non-local interface via the listen_addresses +# configuration parameter, or via the -i or -h command line switches. + +# CAUTION: Configuring the system for local "trust" authentication +# allows any local user to connect as any PostgreSQL user, including +# the database superuser. If you do not trust all your local users, +# use another authentication method. + + +# TYPE DATABASE USER ADDRESS METHOD + +# "local" is for Unix domain socket connections only +local all all trust +# IPv4 local connections: +host all all 127.0.0.1/32 trust +# IPv6 local connections: +host all all ::1/128 trust +# Allow replication connections from localhost, by a user with the +# replication privilege. +local replication all trust +host replication all 127.0.0.1/32 trust +host replication all ::1/128 trust + +host all all all scram-sha-256 diff --git a/authentik/database/pg_ident.conf b/authentik/database/pg_ident.conf new file mode 100644 index 0000000..f5225f2 --- /dev/null +++ b/authentik/database/pg_ident.conf @@ -0,0 +1,72 @@ +# PostgreSQL User Name Maps +# ========================= +# +# --------------- +# Mapping Records +# --------------- +# +# Refer to the PostgreSQL documentation, chapter "Client +# Authentication" for a complete description. A short synopsis +# follows. +# +# This file controls PostgreSQL user name mapping. It maps external +# user names to their corresponding PostgreSQL user names. Records +# are of the form: +# +# MAPNAME SYSTEM-USERNAME PG-USERNAME +# +# (The uppercase quantities must be replaced by actual values.) +# +# MAPNAME is the (otherwise freely chosen) map name that was used in +# pg_hba.conf. SYSTEM-USERNAME is the detected user name of the +# client. PG-USERNAME is the requested PostgreSQL user name. The +# existence of a record specifies that SYSTEM-USERNAME may connect as +# PG-USERNAME. +# +# If SYSTEM-USERNAME starts with a slash (/), it will be treated as a +# regular expression. Optionally this can contain a capture (a +# parenthesized subexpression). The substring matching the capture +# will be substituted for \1 (backslash-one) if present in +# PG-USERNAME. +# +# PG-USERNAME can be "all", a user name, a group name prefixed with "+", or +# a regular expression (if it starts with a slash (/)). If it is a regular +# expression, the substring matching with \1 has no effect. +# +# Multiple maps may be specified in this file and used by pg_hba.conf. +# +# No map names are defined in the default configuration. If all +# system user names and PostgreSQL user names are the same, you don't +# need anything in this file. +# +# --------------- +# Include Records +# --------------- +# +# This file allows the inclusion of external files or directories holding +# more records, using the following keywords: +# +# include FILE +# include_if_exists FILE +# include_dir DIRECTORY +# +# FILE is the file name to include, and DIR is the directory name containing +# the file(s) to include. Any file in a directory will be loaded if suffixed +# with ".conf". The files of a directory are ordered by name. +# include_if_exists ignores missing files. FILE and DIRECTORY can be +# specified as a relative or an absolute path, and can be double-quoted if +# they contain spaces. +# +# ------------------------------- +# Miscellaneous +# ------------------------------- +# +# This file is read on server startup and when the postmaster receives +# a SIGHUP signal. If you edit the file on a running system, you have +# to SIGHUP the postmaster for the changes to take effect. You can +# use "pg_ctl reload" to do that. + +# Put your actual configuration here +# ---------------------------------- + +# MAPNAME SYSTEM-USERNAME PG-USERNAME diff --git a/authentik/database/postgresql.auto.conf b/authentik/database/postgresql.auto.conf new file mode 100644 index 0000000..af7125e --- /dev/null +++ b/authentik/database/postgresql.auto.conf @@ -0,0 +1,2 @@ +# Do not edit this file manually! +# It will be overwritten by the ALTER SYSTEM command. diff --git a/authentik/database/postgresql.conf b/authentik/database/postgresql.conf new file mode 100644 index 0000000..534dfde --- /dev/null +++ b/authentik/database/postgresql.conf @@ -0,0 +1,820 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: B = bytes Time units: us = microseconds +# kB = kilobytes ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +#data_directory = 'ConfigDir' # use data in another directory + # (change requires restart) +#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file + # (change requires restart) +#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +#external_pid_file = '' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +listen_addresses = '*' + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +#port = 5432 # (change requires restart) +max_connections = 100 # (change requires restart) +#reserved_connections = 0 # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +#unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +#client_connection_check_interval = 0 # time between checks for client + # disconnection while running queries; + # 0 for never + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = scram-sha-256 # scram-sha-256 or md5 +#scram_iterations = 4096 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' +#krb_caseins_users = off +#gss_accept_delegation = off + +# - SSL - + +#ssl = off +#ssl_ca_file = '' +#ssl_cert_file = 'server.crt' +#ssl_crl_file = '' +#ssl_crl_dir = '' +#ssl_key_file = 'server.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#huge_page_size = 0 # zero for system default + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is usually the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) +#min_dynamic_shared_memory = 0MB # (change requires restart) +#vacuum_buffer_usage_limit = 256kB # size of vacuum and analyze buffer access strategy ring; + # 0 to disable vacuum buffer access strategy; + # range 128kB to 16GB + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 64 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 2 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#backend_flush_after = 0 # measured in pages, 0 disables +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +#max_worker_processes = 8 # (change requires restart) +#max_parallel_workers_per_gather = 2 # limited by max_parallel_workers +#max_parallel_maintenance_workers = 2 # limited by max_parallel_workers +#max_parallel_workers = 8 # number of max_worker_processes that + # can be used in parallel operations +#parallel_leader_participation = on +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_compression = off # enables compression of full-page writes; + # off, pglz, lz4, zstd, or on +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables +max_wal_size = 1GB +min_wal_size = 80MB + +# - Prefetching during recovery - + +#recovery_prefetch = try # prefetch pages referenced in the WAL? +#wal_decode_buffer_size = 512kB # lookahead window used for prefetching + # (change requires restart) + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_library = '' # library to use to archive a WAL file + # (empty string indicates archive_command should + # be used) +#archive_command = '' # command to use to archive a WAL file + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a WAL file switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. + +#restore_command = '' # command to use to restore an archived WAL file + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' +#archive_cleanup_command = '' # command to execute at every restartpoint +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +#recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the primary and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Primary Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all + +# - Standby Servers - + +# These settings are ignored on a primary server. + +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +#hot_standby = on # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from primary + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers +#max_parallel_apply_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_async_append = on +#enable_bitmapscan = on +#enable_gathermerge = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_incremental_sort = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_memoize = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_parallel_hash = on +#enable_partition_pruning = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_presorted_aggregate = on +#enable_seqscan = on +#enable_sort = on +#enable_tidscan = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#jit = on # allow JIT compilation +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan +#recursive_worktable_factor = 10.0 # range 0.001-1000000 + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, jsonlog, syslog, and + # eventlog, depending on platform. + # csvlog and jsonlog require + # logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr, jsonlog, + # and csvlog into log files. Required + # to be on for csvlogs and jsonlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (Windows): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + +#log_startup_progress_interval = 10s # Time between progress updates for + # long-running startup operations. + # 0 disables the feature, > 0 indicates + # the interval in milliseconds. + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_autovacuum_min_duration = 10min # log autovacuum activity; + # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#log_checkpoints = on +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +#log_line_prefix = '%m [%p] ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %P = process ID of parallel group leader + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %Q = query ID (0 if none or not computed) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_recovery_conflict_waits = off # log standby recovery conflict waits + # >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = UTC + +# - Process Title - + +#cluster_name = '' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Cumulative Query and Index Statistics - + +#track_activities = on +#track_activity_query_size = 1024 # (change requires restart) +#track_counts = on +#track_io_timing = off +#track_wal_io_timing = off +#track_functions = none # none, pl, all +#stats_fetch_consistency = cache # cache, none, snapshot + + +# - Monitoring - + +#compute_query_id = auto +#log_statement_stats = off +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_table_access_method = 'heap' +#default_tablespace = '' # a tablespace name, '' uses the default +#default_toast_compression = 'pglz' # 'pglz' or 'lz4' +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#idle_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_table_age = 150000000 +#vacuum_freeze_min_age = 50000000 +#vacuum_failsafe_age = 1600000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_failsafe_age = 1600000000 +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_pending_list_limit = 4MB +#createrole_self_grant = '' # set and/or inherit + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = UTC +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'en_US.utf8' # locale for system error message + # strings +lc_monetary = 'en_US.utf8' # locale for monetary formatting +lc_numeric = 'en_US.utf8' # locale for number formatting +lc_time = 'en_US.utf8' # locale for time formatting + +#icu_validation_level = warning # report ICU locale validation + # errors at the given level + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#local_preload_libraries = '' +#session_preload_libraries = '' +#shared_preload_libraries = '' # (change requires restart) +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' +#gin_fuzzy_search_limit = 0 + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) +#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +#include_dir = '...' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here diff --git a/collectd/etc/collectd.conf b/collectd/etc/collectd.conf new file mode 100644 index 0000000..6b749a1 --- /dev/null +++ b/collectd/etc/collectd.conf @@ -0,0 +1,1075 @@ +# Config file for collectd(1). +# +# Some plugins need additional configuration and are disabled by default. +# Please read collectd.conf(5) for details. +# +# You should also read /usr/share/doc/collectd-core/README.Debian.plugins +# before enabling any more plugins. + +############################################################################## +# Global # +#----------------------------------------------------------------------------# +# Global settings for the daemon. # +############################################################################## + +Hostname "server" +FQDNLookup true +#BaseDir "/var/lib/collectd" +#PluginDir "/usr/lib/collectd" +#TypesDB "/usr/share/collectd/types.db" "/etc/collectd/my_types.db" + +#----------------------------------------------------------------------------# +# When enabled, plugins are loaded automatically with the default options # +# when an appropriate block is encountered. # +# Disabled by default. # +#----------------------------------------------------------------------------# +#AutoLoadPlugin false + +#----------------------------------------------------------------------------# +# Interval at which to query values. This may be overwritten on a per-plugin # +# base by using the 'Interval' option of the LoadPlugin block: # +# # +# Interval 60 # +# # +#----------------------------------------------------------------------------# +#Interval 10 + +#Timeout 2 +#ReadThreads 5 +#WriteThreads 5 + +# Limit the size of the write queue. Default is no limit. Setting up a limit +# is recommended for servers handling a high volume of traffic. +#WriteQueueLimitHigh 1000000 +#WriteQueueLimitLow 800000 + +############################################################################## +# Logging # +#----------------------------------------------------------------------------# +# Plugins which provide logging functions should be loaded first, so log # +# messages generated when loading or configuring other plugins can be # +# accessed. # +############################################################################## + +LoadPlugin logfile +#LoadPlugin syslog + + + LogLevel "info" + File "/var/lib/collectd/log/collectd.log" + Timestamp true + PrintSeverity false + + +# +# LogLevel info +# + +############################################################################## +# LoadPlugin section # +#----------------------------------------------------------------------------# +# Specify what features to activate. # +############################################################################## + +#LoadPlugin aggregation +#LoadPlugin amqp +#LoadPlugin apache +#LoadPlugin apcups +#LoadPlugin ascent +#LoadPlugin battery +#LoadPlugin bind +#LoadPlugin cgroups +#LoadPlugin conntrack +#LoadPlugin contextswitch +LoadPlugin cpu +LoadPlugin cpufreq +#LoadPlugin csv +#LoadPlugin curl +#LoadPlugin curl_json +#LoadPlugin curl_xml +#LoadPlugin dbi +LoadPlugin df +LoadPlugin disk +#LoadPlugin dns +#LoadPlugin email +LoadPlugin entropy +#LoadPlugin ethstat +#LoadPlugin exec +#LoadPlugin filecount +#LoadPlugin fscache +#LoadPlugin gmond +#LoadPlugin hddtemp +LoadPlugin interface +#LoadPlugin ipmi +#LoadPlugin iptables +#LoadPlugin ipvs +#LoadPlugin irq +#LoadPlugin java +#LoadPlugin libvirt +LoadPlugin load +#LoadPlugin lvm +#LoadPlugin madwifi +#LoadPlugin mbmon +LoadPlugin md +#LoadPlugin memcachec +#LoadPlugin memcached +LoadPlugin memory +#LoadPlugin modbus +#LoadPlugin multimeter +#LoadPlugin mysql +#LoadPlugin netlink +LoadPlugin network +LoadPlugin nfs +#LoadPlugin nginx +#LoadPlugin notify_desktop +#LoadPlugin notify_email +#LoadPlugin ntpd +#LoadPlugin numa +#LoadPlugin nut +#LoadPlugin olsrd +#LoadPlugin openvpn +# +# Globals true +# +#LoadPlugin pinba +#LoadPlugin ping +#LoadPlugin postgresql +#LoadPlugin powerdns +LoadPlugin processes +#LoadPlugin protocols +# +# Globals true +# +#LoadPlugin rrdcached +LoadPlugin rrdtool +LoadPlugin sensors +#LoadPlugin serial +#LoadPlugin snmp +#LoadPlugin statsd +LoadPlugin swap +#LoadPlugin table +#LoadPlugin tail +#LoadPlugin tail_csv +#LoadPlugin tcpconns +#LoadPlugin teamspeak2 +#LoadPlugin ted +#LoadPlugin thermal +#LoadPlugin tokyotyrant +#LoadPlugin unixsock +LoadPlugin uptime +LoadPlugin users +#LoadPlugin uuid +#LoadPlugin varnish +#LoadPlugin vmem +#LoadPlugin vserver +#LoadPlugin wireless +#LoadPlugin write_graphite +#LoadPlugin write_http +#LoadPlugin write_riemann + +############################################################################## +# Plugin configuration # +#----------------------------------------------------------------------------# +# In this section configuration stubs for each plugin are provided. A desc- # +# ription of those options is available in the collectd.conf(5) manual page. # +############################################################################## + +# +# +# #Host "unspecified" +# Plugin "cpu" +# PluginInstance "/[0,2,4,6,8]$/" +# Type "cpu" +# #TypeInstance "unspecified" +# +# SetPlugin "cpu" +# SetPluginInstance "even-%{aggregation}" +# +# GroupBy "Host" +# GroupBy "TypeInstance" +# +# CalculateNum false +# CalculateSum false +# CalculateAverage true +# CalculateMinimum false +# CalculateMaximum false +# CalculateStddev false +# +# + +# +# +# Host "localhost" +# Port "5672" +# VHost "/" +# User "guest" +# Password "guest" +# Exchange "amq.fanout" +# RoutingKey "collectd" +# Persistent false +# StoreRates false +# +# + +# +# +# URL "http://localhost/server-status?auto" +# User "www-user" +# Password "secret" +# VerifyPeer false +# VerifyHost false +# CACert "/etc/ssl/ca.crt" +# Server "apache" +# +# +# +# URL "http://some.domain.tld/status?auto" +# Host "some.domain.tld" +# Server "lighttpd" +# +# + +# +# Host "localhost" +# Port "3551" +# ReportSeconds true +# + +# +# URL "http://localhost/ascent/status/" +# User "www-user" +# Password "secret" +# VerifyPeer false +# VerifyHost false +# CACert "/etc/ssl/ca.crt" +# + +# +# URL "http://localhost:8053/" +# +# ParseTime false +# +# OpCodes true +# QTypes true +# ServerStats true +# ZoneMaintStats true +# ResolverStats false +# MemoryStats true +# +# +# QTypes true +# ResolverStats true +# CacheRRSets true +# +# Zone "127.in-addr.arpa/IN" +# +# + +# +# CGroup "libvirt" +# IgnoreSelected false +# + +# +# DataDir "/var/lib/collectd/csv" +# StoreRates false +# + +# +# +# URL "http://finance.google.com/finance?q=NYSE%3AAMD" +# User "foo" +# Password "bar" +# VerifyPeer false +# VerifyHost false +# CACert "/etc/ssl/ca.crt" +# MeasureResponseTime false +# +# Regex "]*> *([0-9]*\\.[0-9]+) *" +# DSType "GaugeAverage" +# Type "stock_value" +# Instance "AMD" +# +# +# + +# +## See: http://wiki.apache.org/couchdb/Runtime_Statistics +# +# Instance "httpd" +# +# Type "http_requests" +# +# +# +# Type "http_request_methods" +# +# +# +# Type "http_response_codes" +# +# +## Database status metrics: +# +# Instance "dbs" +# +# Type "gauge" +# +# +# Type "counter" +# +# +# Type "bytes" +# +# +# + +# +# +# Host "my_host" +# Instance "some_instance" +# User "collectd" +# Password "thaiNg0I" +# VerifyPeer true +# VerifyHost true +# CACert "/path/to/ca.crt" +# +# +# Type "magic_level" +# InstancePrefix "prefix-" +# InstanceFrom "td[1]" +# ValuesFrom "td[2]/span[@class=\"level\"]" +# +# +# + +# +# +# Statement "SELECT 'customers' AS c_key, COUNT(*) AS c_value \ +# FROM customers_tbl" +# MinVersion 40102 +# MaxVersion 50042 +# +# Type "gauge" +# InstancePrefix "customer" +# InstancesFrom "c_key" +# ValuesFrom "c_value" +# +# +# +# +# Driver "mysql" +# DriverOption "host" "localhost" +# DriverOption "username" "collectd" +# DriverOption "password" "secret" +# DriverOption "dbname" "custdb0" +# SelectDB "custdb0" +# Query "num_of_customers" +# Query "..." +# Host "..." +# +# + +# +# Disk "hda" +# Disk "/sda[23]/" +# IgnoreSelected false +# + +# +# Interface "eth0" +# IgnoreSource "192.168.0.1" +# SelectNumericQueryTypes false +# + +# +# SocketFile "/var/run/collectd-email" +# SocketGroup "collectd" +# SocketPerms "0770" +# MaxConns 5 +# + +# +# Interface "eth0" +# Map "rx_csum_offload_errors" "if_rx_errors" "checksum_offload" +# Map "multicast" "if_multicast" +# MappedOnly false +# + +# +# Exec user "/path/to/exec" +# Exec "user:group" "/path/to/exec" +# NotificationExec user "/path/to/exec" +# + +# +# +# Instance "foodir" +# Name "*.conf" +# MTime "-5m" +# Size "+10k" +# Recursive true +# IncludeHidden false +# +# + +# +# MCReceiveFrom "239.2.11.71" "8649" +# +# +# Type "swap" +# TypeInstance "total" +# DataSource "value" +# +# +# +# Type "swap" +# TypeInstance "free" +# DataSource "value" +# +# + +# +# Host "127.0.0.1" +# Port 7634 +# + +# +# Interface "eth0" +# IgnoreSelected false +# + + Interface "veth*" + IgnoreSelected true + + +# +# Sensor "some_sensor" +# Sensor "another_one" +# IgnoreSelected false +# NotifySensorAdd false +# NotifySensorRemove true +# NotifySensorNotPresent false +# + +# +# Chain "table" "chain" +# + +# +# Irq 7 +# Irq 8 +# Irq 9 +# IgnoreSelected true +# + +# +# JVMArg "-verbose:jni" +# JVMArg "-Djava.class.path=/usr/share/collectd/java/collectd-api.jar" +# +# LoadPlugin "org.collectd.java.GenericJMX" +# +# # See /usr/share/doc/collectd/examples/GenericJMX.conf +# # for an example config. +# +# + +# +# Connection "xen:///" +# RefreshInterval 60 +# Domain "name" +# BlockDevice "name:device" +# InterfaceDevice "name:device" +# IgnoreSelected false +# HostnameFormat name +# InterfaceFormat name +# + +# +# Interface "wlan0" +# IgnoreSelected false +# Source "SysFS" +# WatchSet "None" +# WatchAdd "node_octets" +# WatchAdd "node_rssi" +# WatchAdd "is_rx_acl" +# WatchAdd "is_scan_active" +# + +# +# Host "127.0.0.1" +# Port 411 +# + +# +# Device "/dev/md0" +# IgnoreSelected false +# + +# +# +# Server "localhost" +# Key "page_key" +# +# Regex "(\\d+) bytes sent" +# ExcludeRegex "" +# DSType CounterAdd +# Type "ipt_octets" +# Instance "type_instance" +# +# +# + +# +# +# Socket "/var/run/memcached.sock" +# or: +# Host "127.0.0.1" +# Port "11211" +# +# + +# +# +# RegisterBase 1234 +# RegisterType float +# Type gauge +# Instance "..." +# +# +# +# Address "addr" +# Port "1234" +# Interval 60 +# +# +# Instance "foobar" # optional +# Collect "data_name" +# +# +# + +# +# +# Host "database.serv.er" +# Port "3306" +# User "db_user" +# Password "secret" +# Database "db_name" +# MasterStats true +# +# +# +# Host "localhost" +# Socket "/var/run/mysql/mysqld.sock" +# SlaveStats true +# SlaveNotifications true +# +# + +# +# Interface "All" +# VerboseInterface "All" +# QDisc "eth0" "pfifo_fast-1:0" +# Class "ppp0" "htb-1:10" +# Filter "ppp0" "u32-1:0" +# IgnoreSelected false +# + +# +# # client setup: +# Server "ff18::efc0:4a42" "25826" +# +# SecurityLevel Encrypt +# Username "user" +# Password "secret" +# Interface "eth0" +# +# TimeToLive "128" +# +# # server setup: +# Listen "ff18::efc0:4a42" "25826" +# +# SecurityLevel Sign +# AuthFile "/etc/collectd/passwd" +# Interface "eth0" +# +# MaxPacketSize 1024 +# +# # proxy setup (client and server as above): +# Forward true +# +# # statistics about the network plugin itself +# ReportStats false +# +# # "garbage collection" +# CacheFlush 1800 +# + +# +# URL "http://localhost/status?auto" +# User "www-user" +# Password "secret" +# VerifyPeer false +# VerifyHost false +# CACert "/etc/ssl/ca.crt" +# + +# +# OkayTimeout 1000 +# WarningTimeout 5000 +# FailureTimeout 0 +# + +# +# SMTPServer "localhost" +# SMTPPort 25 +# SMTPUser "my-username" +# SMTPPassword "my-password" +# From "collectd@main0server.com" +# # on . +# # Beware! Do not use not more than two placeholders (%)! +# Subject "[collectd] %s on %s!" +# Recipient "email1@domain1.net" +# Recipient "email2@domain2.com" +# + +# +# Host "localhost" +# Port 123 +# ReverseLookups false +# IncludeUnitID true +# + +# +# UPS "upsname@hostname:port" +# + +# +# Host "127.0.0.1" +# Port "2006" +# CollectLinks "Summary" +# CollectRoutes "Summary" +# CollectTopology "Summary" +# + +# +# StatusFile "/etc/openvpn/openvpn-status.log" +# ImprovedNamingSchema false +# CollectCompression true +# CollectIndividualUsers true +# CollectUserCount false +# + +# +# IncludeDir "/my/include/path" +# BaseName "Collectd::Plugins" +# EnableDebugger "" +# LoadPlugin Monitorus +# LoadPlugin OpenVZ +# +# +# Foo "Bar" +# Qux "Baz" +# +# + +# +# Address "::0" +# Port "30002" +# +# Host "host name" +# Server "server name" +# Script "script name" +# +# + +# +# Host "host.foo.bar" +# Host "host.baz.qux" +# Interval 1.0 +# Timeout 0.9 +# TTL 255 +# SourceAddress "1.2.3.4" +# Device "eth0" +# MaxMissed -1 +# + +# +# +# Statement "SELECT magic FROM wizard WHERE host = $1;" +# Param hostname +# +# +# Type gauge +# InstancePrefix "magic" +# ValuesFrom "magic" +# +# +# +# +# Statement "SELECT COUNT(type) AS count, type \ +# FROM (SELECT CASE \ +# WHEN resolved = 'epoch' THEN 'open' \ +# ELSE 'resolved' END AS type \ +# FROM tickets) type \ +# GROUP BY type;" +# +# +# Type counter +# InstancePrefix "rt36_tickets" +# InstancesFrom "type" +# ValuesFrom "count" +# +# +# +# +# # See /usr/share/doc/collectd-core/examples/postgresql/collectd_insert.sql for details +# Statement "SELECT collectd_insert($1, $2, $3, $4, $5, $6, $7, $8, $9);" +# StoreRates true +# +# +# +# Host "hostname" +# Port 5432 +# User "username" +# Password "secret" +# +# SSLMode "prefer" +# KRBSrvName "kerberos_service_name" +# +# Query magic +# +# +# +# Interval 60 +# Service "service_name" +# +# Query backend # predefined +# Query rt36_tickets +# +# +# +# Service "collectd_store" +# Writer sqlstore +# # see collectd.conf(5) for details +# CommitInterval 30 +# +# + +# +# +# Collect "latency" +# Collect "udp-answers" "udp-queries" +# Socket "/var/run/pdns.controlsocket" +# +# +# Collect "questions" +# Collect "cache-hits" "cache-misses" +# Socket "/var/run/pdns_recursor.controlsocket" +# +# LocalSocket "/opt/collectd/var/run/collectd-powerdns" +# + +# +# Process "name" +# ProcessMatch "foobar" "/usr/bin/perl foobar\\.pl.*" +# + +# +# Value "/^Tcp:/" +# IgnoreSelected false +# + +# +# ModulePath "/path/to/your/python/modules" +# LogTraces true +# Interactive true +# Import "spam" +# +# +# spam "wonderful" "lovely" +# +# + +# +# DaemonAddress "unix:/var/run/rrdcached.sock" +# DataDir "/var/lib/rrdcached/db/collectd" +# CreateFiles true +# CreateFilesAsync false +# CollectStatistics true +# +# The following settings are rather advanced +# and should usually not be touched: +# StepSize 10 +# HeartBeat 20 +# RRARows 1200 +# RRATimespan 158112000 +# XFF 0.1 +# + + + DataDir "/var/lib/collectd/rrd" +# CacheTimeout 120 +# CacheFlush 900 +# WritesPerSecond 30 +# CreateFilesAsync false +# RandomTimeout 0 +# +# The following settings are rather advanced +# and should usually not be touched: +# StepSize 10 +# HeartBeat 20 +# RRARows 1200 +# RRATimespan 158112000 +# XFF 0.1 + + +# +# SensorConfigFile "/etc/sensors3.conf" +# Sensor "it8712-isa-0290/temperature-temp1" +# Sensor "it8712-isa-0290/fanspeed-fan3" +# Sensor "it8712-isa-0290/voltage-in8" +# IgnoreSelected false +# + +# See /usr/share/doc/collectd/examples/snmp-data.conf.gz for a +# comprehensive sample configuration. +# +# +# Type "voltage" +# Table false +# Instance "input_line1" +# Scale 0.1 +# Values "SNMPv2-SMI::enterprises.6050.5.4.1.1.2.1" +# +# +# Type "users" +# Table false +# Instance "" +# Shift -1 +# Values "HOST-RESOURCES-MIB::hrSystemNumUsers.0" +# +# +# Type "if_octets" +# Table true +# InstancePrefix "traffic" +# Instance "IF-MIB::ifDescr" +# Values "IF-MIB::ifInOctets" "IF-MIB::ifOutOctets" +# +# +# +# Address "192.168.0.2" +# Version 1 +# Community "community_string" +# Collect "std_traffic" +# Inverval 120 +# +# +# Address "192.168.0.42" +# Version 2 +# Community "another_string" +# Collect "std_traffic" "hr_users" +# +# +# Address "192.168.0.3" +# Version 1 +# Community "more_communities" +# Collect "powerplus_voltge_input" +# Interval 300 +# +# + +# +# Host "::" +# Port "8125" +# DeleteCounters false +# DeleteTimers false +# DeleteGauges false +# DeleteSets false +# TimerPercentile 90.0 +# + +# +# ReportByDevice false +# ReportBytes true +# + +# +# +# Instance "slabinfo" +# Separator " " +# +# Type gauge +# InstancePrefix "active_objs" +# InstancesFrom 0 +# ValuesFrom 1 +# +# +# Type gauge +# InstancePrefix "objperslab" +# InstancesFrom 0 +# ValuesFrom 4 +# +#
+# + +# +# +# Instance "exim" +# +# Regex "S=([1-9][0-9]*)" +# DSType "CounterAdd" +# Type "ipt_bytes" +# Instance "total" +# +# +# Regex "\\" +# ExcludeRegex "\\.*mail_spool defer" +# DSType "CounterInc" +# Type "counter" +# Instance "local_user" +# +# +# + +# +# +# Type "percent" +# Instance "dropped" +# ValueFrom 1 +# +# +# Type "bytes" +# Instance "wire-realtime" +# ValueFrom 2 +# +# +# Type "alerts_per_second" +# ValueFrom 3 +# +# +# Type "kpackets_wire_per_sec.realtime" +# ValueFrom 4 +# +# +# Instance "snort-eth0" +# Interval 600 +# Collect "dropped" "mbps" "alerts" "kpps" +# TimeFrom 0 +# +# + +# +# ListeningPorts false +# LocalPort "25" +# RemotePort "25" +# + +# +# Host "127.0.0.1" +# Port "51234" +# Server "8767" +# + +# +# Device "/dev/ttyUSB0" +# Retries 0 +# + +# +# ForceUseProcfs false +# Device "THRM" +# IgnoreSelected false +# + +# +# Host "localhost" +# Port "1978" +# + +# +# SocketFile "/var/run/collectd-unixsock" +# SocketGroup "collectd" +# SocketPerms "0660" +# DeleteSocket false +# + +# +# UUIDFile "/etc/uuid" +# + +# +# +# CollectCache true +# CollectBackend true +# CollectBan false # Varnish 3 only +# CollectConnections true +# CollectDirectorDNS false # Varnish 3 only +# CollectSHM true +# CollectESI false +# CollectFetch false +# CollectHCB false +# CollectObjects false +# CollectPurge false # Varnish 2 only +# CollectSession false +# CollectSMA false # Varnish 2 only +# CollectSMS false +# CollectSM false # Varnish 2 only +# CollectStruct false +# CollectTotals false +# CollectUptime false +# CollectdVCL false +# CollectWorkers false +# +# +# +# CollectCache true +# +# + +# +# Verbose false +# + +# +# +# Host "localhost" +# Port "2003" +# Protocol "udp" +# LogSendErrors true +# Prefix "collectd" +# Postfix "collectd" +# StoreRates true +# AlwaysAppendDS false +# EscapeCharacter "_" +# +# + +# +# +# User "collectd" +# Password "secret" +# VerifyPeer true +# VerifyHost true +# CACert "/etc/ssl/ca.crt" +# Format "Command" +# StoreRates false +# +# + +# +# +# Host "localhost" +# Port 5555 +# Protocol UDP +# StoreRates true +# AlwaysAppendDS false +# TTLFactor 2.0 +# +# Tag "foobar" +# + + + Filter "*.conf" + diff --git a/collectd/etc/collectd.conf.d/btrfs-data.conf b/collectd/etc/collectd.conf.d/btrfs-data.conf new file mode 100644 index 0000000..5c70041 --- /dev/null +++ b/collectd/etc/collectd.conf.d/btrfs-data.conf @@ -0,0 +1,6 @@ +LoadPlugin exec + + + Exec collectd "/host/usr/local/bin/btrfs-data" + + diff --git a/collectd/etc/collectd.conf.d/df.conf b/collectd/etc/collectd.conf.d/df.conf new file mode 100644 index 0000000..a6a903d --- /dev/null +++ b/collectd/etc/collectd.conf.d/df.conf @@ -0,0 +1,6 @@ + + MountPoint "/mnt/due" + MountPoint "/mnt/quattro" + MountPoint "/mnt/mezzo/var/lib/docker" + + diff --git a/collectd/etc/collectd.conf.d/du-data.conf b/collectd/etc/collectd.conf.d/du-data.conf new file mode 100644 index 0000000..cc064d3 --- /dev/null +++ b/collectd/etc/collectd.conf.d/du-data.conf @@ -0,0 +1,6 @@ +LoadPlugin exec + + + Exec collectd "/host/usr/local/bin/du-data" + + diff --git a/collectd/etc/collectd.conf.d/funds-data.conf b/collectd/etc/collectd.conf.d/funds-data.conf new file mode 100644 index 0000000..0d2d83a --- /dev/null +++ b/collectd/etc/collectd.conf.d/funds-data.conf @@ -0,0 +1,6 @@ +LoadPlugin exec + + + Exec nobody "/host/usr/local/bin/funds-data" + + diff --git a/collectd/etc/collectd.conf.d/power-data.conf b/collectd/etc/collectd.conf.d/power-data.conf new file mode 100644 index 0000000..08f5c9e --- /dev/null +++ b/collectd/etc/collectd.conf.d/power-data.conf @@ -0,0 +1,5 @@ +LoadPlugin exec + + + Exec collectd "/host/usr/local/bin/power-data" + diff --git a/collectd/etc/collectd.conf.d/speedtest-data.conf b/collectd/etc/collectd.conf.d/speedtest-data.conf new file mode 100644 index 0000000..5d33a5a --- /dev/null +++ b/collectd/etc/collectd.conf.d/speedtest-data.conf @@ -0,0 +1,6 @@ +LoadPlugin exec + + + Exec nobody "/host/usr/local/bin/speedtest-data" + + diff --git a/collectd/etc/collectd.conf.d/temperature-data.conf b/collectd/etc/collectd.conf.d/temperature-data.conf new file mode 100644 index 0000000..20f36ff --- /dev/null +++ b/collectd/etc/collectd.conf.d/temperature-data.conf @@ -0,0 +1,6 @@ +LoadPlugin exec + + + Exec collectd "/host/usr/local/bin/temperature-data" + + diff --git a/dns-ad-blocker/config/custom.conf b/dns-ad-blocker/config/custom.conf new file mode 100644 index 0000000..d6d87bf --- /dev/null +++ b/dns-ad-blocker/config/custom.conf @@ -0,0 +1,12 @@ +server=/google.cn/ +server=/securepubads.g.doubleclick.net/ +server=/adservice.google.com/ +server=/www.googleadservices.com/ + +#server=/googlevideo.com/ # r3---sn-5hne6nsk. + +#server=/herderin.veenboer.xyz/192.168.2.193 +#address=/herderin.veenboer.xyz/192.168.2.193 + +# Custom hosts +addn-hosts=/etc/dnsmasq.hosts diff --git a/dns-ad-blocker/dnsmasq.conf b/dns-ad-blocker/dnsmasq.conf new file mode 100755 index 0000000..5f46737 --- /dev/null +++ b/dns-ad-blocker/dnsmasq.conf @@ -0,0 +1,44 @@ +# Configuration file for dnsmasq. +# +# Format is one option per line, legal options are the same +# as the long options legal on the command line. See +# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. + +brol + +# Never forward plain names (without a dot or domain part) +domain-needed + +# Never forward addresses in the non-routed address spaces +bogus-priv + +# Log Queries, disabled by default +# log-queries + +# Logging should be async if enabled, buffer up to 25 lines +log-async=50 + +# Set the cache size to something reasonable +cache-size=2500 + +# Don't use hosts Name Servers +no-resolv + +# Don't read the docker containers host file +no-hosts + +# Forward Lookup Name Servers +server=127.0.0.1#40 # NS1 +server=127.0.0.1#40 # NS2 + +# Include the zone whitelist +conf-file=/etc/dnsmasq.whitelist + +# Include the zone blacklist +conf-file=/etc/dnsmasq.blacklist + +# Include all files in the mountable volume +conf-dir=/config,*.conf + +# Custom hosts +addn-hosts=/etc/dnsmasq.hosts diff --git a/dsmr/data/pg_hba.conf b/dsmr/data/pg_hba.conf new file mode 100644 index 0000000..9e4e496 --- /dev/null +++ b/dsmr/data/pg_hba.conf @@ -0,0 +1,99 @@ +# PostgreSQL Client Authentication Configuration File +# =================================================== +# +# Refer to the "Client Authentication" section in the PostgreSQL +# documentation for a complete description of this file. A short +# synopsis follows. +# +# This file controls: which hosts are allowed to connect, how clients +# are authenticated, which PostgreSQL user names they can use, which +# databases they can access. Records take one of these forms: +# +# local DATABASE USER METHOD [OPTIONS] +# host DATABASE USER ADDRESS METHOD [OPTIONS] +# hostssl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostgssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnogssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# +# (The uppercase items must be replaced by actual values.) +# +# The first field is the connection type: "local" is a Unix-domain +# socket, "host" is either a plain or SSL-encrypted TCP/IP socket, +# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a +# non-SSL TCP/IP socket. Similarly, "hostgssenc" uses a +# GSSAPI-encrypted TCP/IP socket, while "hostnogssenc" uses a +# non-GSSAPI socket. +# +# DATABASE can be "all", "sameuser", "samerole", "replication", a +# database name, or a comma-separated list thereof. The "all" +# keyword does not match "replication". Access to replication +# must be enabled in a separate record (see example below). +# +# USER can be "all", a user name, a group name prefixed with "+", or a +# comma-separated list thereof. In both the DATABASE and USER fields +# you can also write a file name prefixed with "@" to include names +# from a separate file. +# +# ADDRESS specifies the set of hosts the record matches. It can be a +# host name, or it is made up of an IP address and a CIDR mask that is +# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that +# specifies the number of significant bits in the mask. A host name +# that starts with a dot (.) matches a suffix of the actual host name. +# Alternatively, you can write an IP address and netmask in separate +# columns to specify the set of hosts. Instead of a CIDR-address, you +# can write "samehost" to match any of the server's own IP addresses, +# or "samenet" to match any address in any subnet that the server is +# directly connected to. +# +# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256", +# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert". +# Note that "password" sends passwords in clear text; "md5" or +# "scram-sha-256" are preferred since they send encrypted passwords. +# +# OPTIONS are a set of options for the authentication in the format +# NAME=VALUE. The available options depend on the different +# authentication methods -- refer to the "Client Authentication" +# section in the documentation for a list of which options are +# available for which authentication methods. +# +# Database and user names containing spaces, commas, quotes and other +# special characters must be quoted. Quoting one of the keywords +# "all", "sameuser", "samerole" or "replication" makes the name lose +# its special character, and just match a database or username with +# that name. +# +# This file is read on server startup and when the server receives a +# SIGHUP signal. If you edit the file on a running system, you have to +# SIGHUP the server for the changes to take effect, run "pg_ctl reload", +# or execute "SELECT pg_reload_conf()". +# +# Put your actual configuration here +# ---------------------------------- +# +# If you want to allow non-local connections, you need to add more +# "host" records. In that case you will also need to make PostgreSQL +# listen on a non-local interface via the listen_addresses +# configuration parameter, or via the -i or -h command line switches. + +# CAUTION: Configuring the system for local "trust" authentication +# allows any local user to connect as any PostgreSQL user, including +# the database superuser. If you do not trust all your local users, +# use another authentication method. + + +# TYPE DATABASE USER ADDRESS METHOD + +# "local" is for Unix domain socket connections only +local all all trust +# IPv4 local connections: +host all all 127.0.0.1/32 trust +# IPv6 local connections: +host all all ::1/128 trust +# Allow replication connections from localhost, by a user with the +# replication privilege. +local replication all trust +host replication all 127.0.0.1/32 trust +host replication all ::1/128 trust + +host all all all md5 diff --git a/dsmr/data/pg_ident.conf b/dsmr/data/pg_ident.conf new file mode 100644 index 0000000..a5870e6 --- /dev/null +++ b/dsmr/data/pg_ident.conf @@ -0,0 +1,42 @@ +# PostgreSQL User Name Maps +# ========================= +# +# Refer to the PostgreSQL documentation, chapter "Client +# Authentication" for a complete description. A short synopsis +# follows. +# +# This file controls PostgreSQL user name mapping. It maps external +# user names to their corresponding PostgreSQL user names. Records +# are of the form: +# +# MAPNAME SYSTEM-USERNAME PG-USERNAME +# +# (The uppercase quantities must be replaced by actual values.) +# +# MAPNAME is the (otherwise freely chosen) map name that was used in +# pg_hba.conf. SYSTEM-USERNAME is the detected user name of the +# client. PG-USERNAME is the requested PostgreSQL user name. The +# existence of a record specifies that SYSTEM-USERNAME may connect as +# PG-USERNAME. +# +# If SYSTEM-USERNAME starts with a slash (/), it will be treated as a +# regular expression. Optionally this can contain a capture (a +# parenthesized subexpression). The substring matching the capture +# will be substituted for \1 (backslash-one) if present in +# PG-USERNAME. +# +# Multiple maps may be specified in this file and used by pg_hba.conf. +# +# No map names are defined in the default configuration. If all +# system user names and PostgreSQL user names are the same, you don't +# need anything in this file. +# +# This file is read on server startup and when the postmaster receives +# a SIGHUP signal. If you edit the file on a running system, you have +# to SIGHUP the postmaster for the changes to take effect. You can +# use "pg_ctl reload" to do that. + +# Put your actual configuration here +# ---------------------------------- + +# MAPNAME SYSTEM-USERNAME PG-USERNAME diff --git a/dsmr/data/postgresql.auto.conf b/dsmr/data/postgresql.auto.conf new file mode 100644 index 0000000..af7125e --- /dev/null +++ b/dsmr/data/postgresql.auto.conf @@ -0,0 +1,2 @@ +# Do not edit this file manually! +# It will be overwritten by the ALTER SYSTEM command. diff --git a/dsmr/data/postgresql.conf b/dsmr/data/postgresql.conf new file mode 100644 index 0000000..c4c78ae --- /dev/null +++ b/dsmr/data/postgresql.conf @@ -0,0 +1,782 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: B = bytes Time units: us = microseconds +# kB = kilobytes ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +#data_directory = 'ConfigDir' # use data in another directory + # (change requires restart) +#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file + # (change requires restart) +#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +#external_pid_file = '' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +listen_addresses = '*' + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +#port = 5432 # (change requires restart) +max_connections = 100 # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +#unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = md5 # md5 or scram-sha-256 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' +#krb_caseins_users = off + +# - SSL - + +#ssl = off +#ssl_ca_file = '' +#ssl_cert_file = 'server.crt' +#ssl_crl_file = '' +#ssl_key_file = 'server.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 64 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 10 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +#max_worker_processes = 8 # (change requires restart) +#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers +#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#parallel_leader_participation = on +#max_parallel_workers = 8 # maximum number of max_worker_processes that + # can be used in parallel operations +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) +#backend_flush_after = 0 # measured in pages, 0 disables + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_compression = off # enable compression of full-page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +max_wal_size = 1GB +min_wal_size = 80MB +#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_command = '' # command to use to archive a logfile segment + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a logfile segment switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. + +#restore_command = '' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +#archive_cleanup_command = '' # command to execute at every restartpoint +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +#recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the master and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables + +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Master Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all +#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed + +# - Standby Servers - + +# These settings are ignored on a master server. + +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +#promote_trigger_file = '' # file name whose presence ends recovery +#hot_standby = on # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from master + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_bitmapscan = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_seqscan = on +#enable_sort = on +#enable_incremental_sort = on +#enable_tidscan = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_parallel_hash = on +#enable_partition_pruning = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#force_parallel_mode = off +#jit = on # allow JIT compilation +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, syslog, and eventlog, + # depending on platform. csvlog + # requires logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr and csvlog + # into log files. Required to be on for + # csvlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (win32): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_checkpoints = off +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +#log_line_prefix = '%m [%p] ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = 'Etc/UTC' + +#------------------------------------------------------------------------------ +# PROCESS TITLE +#------------------------------------------------------------------------------ + +#cluster_name = '' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Query and Index Statistics Collector - + +#track_activities = on +#track_counts = on +#track_io_timing = off +#track_functions = none # none, pl, all +#track_activity_query_size = 1024 # (change requires restart) +#stats_temp_directory = 'pg_stat_tmp' + + +# - Monitoring - + +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off +#log_statement_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_tablespace = '' # a tablespace name, '' uses the default +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#default_table_access_method = 'heap' +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_min_age = 50000000 +#vacuum_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_cleanup_index_scale_factor = 0.1 # fraction of total number of tuples + # before index cleanup, 0 always performs + # index cleanup +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_fuzzy_search_limit = 0 +#gin_pending_list_limit = 4MB + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = 'Etc/UTC' +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'en_US.utf8' # locale for system error message + # strings +lc_monetary = 'en_US.utf8' # locale for monetary formatting +lc_numeric = 'en_US.utf8' # locale for number formatting +lc_time = 'en_US.utf8' # locale for time formatting + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#shared_preload_libraries = '' # (change requires restart) +#local_preload_libraries = '' +#session_preload_libraries = '' +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' +#extension_destdir = '' # prepend path when loading extensions + # and shared objects (added by Debian) + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#operator_precedence_warning = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +#include_dir = '...' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here diff --git a/mosquitto/config/mosquitto.conf b/mosquitto/config/mosquitto.conf new file mode 100644 index 0000000..c8b298e --- /dev/null +++ b/mosquitto/config/mosquitto.conf @@ -0,0 +1,8 @@ +persistence true +persistence_location /mosquitto/data/ + +log_dest file /mosquitto/log/mosquitto.log +listener 1883 + +allow_anonymous false +password_file /mosquitto/config/passwords.txt diff --git a/openvpn-server/openvpn.conf b/openvpn-server/openvpn.conf new file mode 100644 index 0000000..3d940e6 --- /dev/null +++ b/openvpn-server/openvpn.conf @@ -0,0 +1,39 @@ +### Default +server 192.168.255.0 255.255.255.0 +verb 3 +key /etc/openvpn/pki/private/csbnw.no-ip.org.key +ca /etc/openvpn/pki/ca.crt +cert /etc/openvpn/pki/issued/csbnw.no-ip.org.crt +dh /etc/openvpn/pki/dh.pem +tls-auth /etc/openvpn/pki/ta.key +key-direction 0 +keepalive 10 60 +persist-key +persist-tun + +### Misc +duplicate-cn +#auth-nocache +#cipher AES-256-CBC +#comp-lzo + +### Enable 443/TCP +proto tcp +port 443 +dev tun0 + +### Logging +status /etc/openvpn/openvpn-status.log +log-append /etc/openvpn/openvpn.log + +user nobody +group nogroup + +### Route Configurations Below +route 192.168.254.0 255.255.255.0 + +### Push Configurations Below +push "dhcp-option DNS 192.168.2.200" + +### Webserver +#port-share host 444 diff --git a/postgis/pg_hba.conf b/postgis/pg_hba.conf new file mode 100644 index 0000000..4e202d3 --- /dev/null +++ b/postgis/pg_hba.conf @@ -0,0 +1,100 @@ +# PostgreSQL Client Authentication Configuration File +# =================================================== +# +# Refer to the "Client Authentication" section in the PostgreSQL +# documentation for a complete description of this file. A short +# synopsis follows. +# +# This file controls: which hosts are allowed to connect, how clients +# are authenticated, which PostgreSQL user names they can use, which +# databases they can access. Records take one of these forms: +# +# local DATABASE USER METHOD [OPTIONS] +# host DATABASE USER ADDRESS METHOD [OPTIONS] +# hostssl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostgssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnogssenc DATABASE USER ADDRESS METHOD [OPTIONS] +# +# (The uppercase items must be replaced by actual values.) +# +# The first field is the connection type: +# - "local" is a Unix-domain socket +# - "host" is a TCP/IP socket (encrypted or not) +# - "hostssl" is a TCP/IP socket that is SSL-encrypted +# - "hostnossl" is a TCP/IP socket that is not SSL-encrypted +# - "hostgssenc" is a TCP/IP socket that is GSSAPI-encrypted +# - "hostnogssenc" is a TCP/IP socket that is not GSSAPI-encrypted +# +# DATABASE can be "all", "sameuser", "samerole", "replication", a +# database name, or a comma-separated list thereof. The "all" +# keyword does not match "replication". Access to replication +# must be enabled in a separate record (see example below). +# +# USER can be "all", a user name, a group name prefixed with "+", or a +# comma-separated list thereof. In both the DATABASE and USER fields +# you can also write a file name prefixed with "@" to include names +# from a separate file. +# +# ADDRESS specifies the set of hosts the record matches. It can be a +# host name, or it is made up of an IP address and a CIDR mask that is +# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that +# specifies the number of significant bits in the mask. A host name +# that starts with a dot (.) matches a suffix of the actual host name. +# Alternatively, you can write an IP address and netmask in separate +# columns to specify the set of hosts. Instead of a CIDR-address, you +# can write "samehost" to match any of the server's own IP addresses, +# or "samenet" to match any address in any subnet that the server is +# directly connected to. +# +# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256", +# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert". +# Note that "password" sends passwords in clear text; "md5" or +# "scram-sha-256" are preferred since they send encrypted passwords. +# +# OPTIONS are a set of options for the authentication in the format +# NAME=VALUE. The available options depend on the different +# authentication methods -- refer to the "Client Authentication" +# section in the documentation for a list of which options are +# available for which authentication methods. +# +# Database and user names containing spaces, commas, quotes and other +# special characters must be quoted. Quoting one of the keywords +# "all", "sameuser", "samerole" or "replication" makes the name lose +# its special character, and just match a database or username with +# that name. +# +# This file is read on server startup and when the server receives a +# SIGHUP signal. If you edit the file on a running system, you have to +# SIGHUP the server for the changes to take effect, run "pg_ctl reload", +# or execute "SELECT pg_reload_conf()". +# +# Put your actual configuration here +# ---------------------------------- +# +# If you want to allow non-local connections, you need to add more +# "host" records. In that case you will also need to make PostgreSQL +# listen on a non-local interface via the listen_addresses +# configuration parameter, or via the -i or -h command line switches. + +# CAUTION: Configuring the system for local "trust" authentication +# allows any local user to connect as any PostgreSQL user, including +# the database superuser. If you do not trust all your local users, +# use another authentication method. + + +# TYPE DATABASE USER ADDRESS METHOD + +# "local" is for Unix domain socket connections only +local all all trust +# IPv4 local connections: +host all all 127.0.0.1/32 trust +# IPv6 local connections: +host all all ::1/128 trust +# Allow replication connections from localhost, by a user with the +# replication privilege. +local replication all trust +host replication all 127.0.0.1/32 trust +host replication all ::1/128 trust + +host all all all scram-sha-256 diff --git a/postgis/pg_ident.conf b/postgis/pg_ident.conf new file mode 100644 index 0000000..a5870e6 --- /dev/null +++ b/postgis/pg_ident.conf @@ -0,0 +1,42 @@ +# PostgreSQL User Name Maps +# ========================= +# +# Refer to the PostgreSQL documentation, chapter "Client +# Authentication" for a complete description. A short synopsis +# follows. +# +# This file controls PostgreSQL user name mapping. It maps external +# user names to their corresponding PostgreSQL user names. Records +# are of the form: +# +# MAPNAME SYSTEM-USERNAME PG-USERNAME +# +# (The uppercase quantities must be replaced by actual values.) +# +# MAPNAME is the (otherwise freely chosen) map name that was used in +# pg_hba.conf. SYSTEM-USERNAME is the detected user name of the +# client. PG-USERNAME is the requested PostgreSQL user name. The +# existence of a record specifies that SYSTEM-USERNAME may connect as +# PG-USERNAME. +# +# If SYSTEM-USERNAME starts with a slash (/), it will be treated as a +# regular expression. Optionally this can contain a capture (a +# parenthesized subexpression). The substring matching the capture +# will be substituted for \1 (backslash-one) if present in +# PG-USERNAME. +# +# Multiple maps may be specified in this file and used by pg_hba.conf. +# +# No map names are defined in the default configuration. If all +# system user names and PostgreSQL user names are the same, you don't +# need anything in this file. +# +# This file is read on server startup and when the postmaster receives +# a SIGHUP signal. If you edit the file on a running system, you have +# to SIGHUP the postmaster for the changes to take effect. You can +# use "pg_ctl reload" to do that. + +# Put your actual configuration here +# ---------------------------------- + +# MAPNAME SYSTEM-USERNAME PG-USERNAME diff --git a/postgis/postgresql.auto.conf b/postgis/postgresql.auto.conf new file mode 100644 index 0000000..af7125e --- /dev/null +++ b/postgis/postgresql.auto.conf @@ -0,0 +1,2 @@ +# Do not edit this file manually! +# It will be overwritten by the ALTER SYSTEM command. diff --git a/postgis/postgresql.conf b/postgis/postgresql.conf new file mode 100644 index 0000000..852aa02 --- /dev/null +++ b/postgis/postgresql.conf @@ -0,0 +1,798 @@ +# ----------------------------- +# PostgreSQL configuration file +# ----------------------------- +# +# This file consists of lines of the form: +# +# name = value +# +# (The "=" is optional.) Whitespace may be used. Comments are introduced with +# "#" anywhere on a line. The complete list of parameter names and allowed +# values can be found in the PostgreSQL documentation. +# +# The commented-out settings shown in this file represent the default values. +# Re-commenting a setting is NOT sufficient to revert it to the default value; +# you need to reload the server. +# +# This file is read on server startup and when the server receives a SIGHUP +# signal. If you edit the file on a running system, you have to SIGHUP the +# server for the changes to take effect, run "pg_ctl reload", or execute +# "SELECT pg_reload_conf()". Some parameters, which are marked below, +# require a server shutdown and restart to take effect. +# +# Any parameter can also be given as a command-line option to the server, e.g., +# "postgres -c log_connections=on". Some parameters can be changed at run time +# with the "SET" SQL command. +# +# Memory units: B = bytes Time units: us = microseconds +# kB = kilobytes ms = milliseconds +# MB = megabytes s = seconds +# GB = gigabytes min = minutes +# TB = terabytes h = hours +# d = days + + +#------------------------------------------------------------------------------ +# FILE LOCATIONS +#------------------------------------------------------------------------------ + +# The default values of these variables are driven from the -D command-line +# option or PGDATA environment variable, represented here as ConfigDir. + +#data_directory = 'ConfigDir' # use data in another directory + # (change requires restart) +#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file + # (change requires restart) +#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file + # (change requires restart) + +# If external_pid_file is not explicitly set, no extra PID file is written. +#external_pid_file = '' # write an extra PID file + # (change requires restart) + + +#------------------------------------------------------------------------------ +# CONNECTIONS AND AUTHENTICATION +#------------------------------------------------------------------------------ + +# - Connection Settings - + +listen_addresses = '*' + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) +#port = 5432 # (change requires restart) +max_connections = 100 # (change requires restart) +#superuser_reserved_connections = 3 # (change requires restart) +#unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories + # (change requires restart) +#unix_socket_group = '' # (change requires restart) +#unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) +#bonjour = off # advertise server via Bonjour + # (change requires restart) +#bonjour_name = '' # defaults to the computer name + # (change requires restart) + +# - TCP settings - +# see "man tcp" for details + +#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default +#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default +#tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + +#client_connection_check_interval = 0 # time between checks for client + # disconnection while running queries; + # 0 for never + +# - Authentication - + +#authentication_timeout = 1min # 1s-600s +#password_encryption = scram-sha-256 # scram-sha-256 or md5 +#db_user_namespace = off + +# GSSAPI using Kerberos +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' +#krb_caseins_users = off + +# - SSL - + +#ssl = off +#ssl_ca_file = '' +#ssl_cert_file = 'server.crt' +#ssl_crl_file = '' +#ssl_crl_dir = '' +#ssl_key_file = 'server.key' +#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers +#ssl_prefer_server_ciphers = on +#ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' +#ssl_dh_params_file = '' +#ssl_passphrase_command = '' +#ssl_passphrase_command_supports_reload = off + + +#------------------------------------------------------------------------------ +# RESOURCE USAGE (except WAL) +#------------------------------------------------------------------------------ + +# - Memory - + +shared_buffers = 128MB # min 128kB + # (change requires restart) +#huge_pages = try # on, off, or try + # (change requires restart) +#huge_page_size = 0 # zero for system default + # (change requires restart) +#temp_buffers = 8MB # min 800kB +#max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) +# Caution: it is not advisable to set max_prepared_transactions nonzero unless +# you actively intend to use prepared transactions. +#work_mem = 4MB # min 64kB +#hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem +#maintenance_work_mem = 64MB # min 1MB +#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB +#max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) +dynamic_shared_memory_type = posix # the default is the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) +#min_dynamic_shared_memory = 0MB # (change requires restart) + +# - Disk - + +#temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + +# - Kernel Resources - + +#max_files_per_process = 1000 # min 64 + # (change requires restart) + +# - Cost-Based Vacuum Delay - + +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) +#vacuum_cost_page_hit = 1 # 0-10000 credits +#vacuum_cost_page_miss = 2 # 0-10000 credits +#vacuum_cost_page_dirty = 20 # 0-10000 credits +#vacuum_cost_limit = 200 # 1-10000 credits + +# - Background Writer - + +#bgwriter_delay = 200ms # 10-10000ms between rounds +#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables +#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round +#bgwriter_flush_after = 512kB # measured in pages, 0 disables + +# - Asynchronous Behavior - + +#backend_flush_after = 0 # measured in pages, 0 disables +#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +#max_worker_processes = 8 # (change requires restart) +#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers +#max_parallel_workers = 8 # maximum number of max_worker_processes that + # can be used in parallel operations +#parallel_leader_participation = on +#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) + + +#------------------------------------------------------------------------------ +# WRITE-AHEAD LOG +#------------------------------------------------------------------------------ + +# - Settings - + +#wal_level = replica # minimal, replica, or logical + # (change requires restart) +#fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) +#synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on +#wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync +#full_page_writes = on # recover from partial page writes +#wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) +#wal_compression = off # enable compression of full-page writes +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files +#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) +#wal_writer_delay = 200ms # 1-10000 milliseconds +#wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB + +#commit_delay = 0 # range 0-100000, in microseconds +#commit_siblings = 5 # range 1-1000 + +# - Checkpoints - + +#checkpoint_timeout = 5min # range 30s-1d +#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 +#checkpoint_flush_after = 256kB # measured in pages, 0 disables +#checkpoint_warning = 30s # 0 disables +max_wal_size = 1GB +min_wal_size = 80MB + +# - Archiving - + +#archive_mode = off # enables archiving; off, on, or always + # (change requires restart) +#archive_command = '' # command to use to archive a logfile segment + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' +#archive_timeout = 0 # force a logfile segment switch after this + # number of seconds; 0 disables + +# - Archive Recovery - + +# These are only used in recovery mode. + +#restore_command = '' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' +#archive_cleanup_command = '' # command to execute at every restartpoint +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +#recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + +#------------------------------------------------------------------------------ +# REPLICATION +#------------------------------------------------------------------------------ + +# - Sending Servers - + +# Set these on the primary and on any standby that will send replication data. + +#max_wal_senders = 10 # max number of walsender processes + # (change requires restart) +#max_replication_slots = 10 # max number of replication slots + # (change requires restart) +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables +#wal_sender_timeout = 60s # in milliseconds; 0 disables +#track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + +# - Primary Server - + +# These settings are ignored on a standby server. + +#synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all +#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed + +# - Standby Servers - + +# These settings are ignored on a primary server. + +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +#promote_trigger_file = '' # file name whose presence ends recovery +#hot_standby = on # "off" disallows queries during recovery + # (change requires restart) +#max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay +#max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set +#wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables +#hot_standby_feedback = off # send info from standby to prevent + # query conflicts +#wal_receiver_timeout = 60s # time that receiver waits for + # communication from primary + # in milliseconds; 0 disables +#wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt +#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery + +# - Subscribers - + +# These settings are ignored on a publisher. + +#max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) +#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + + +#------------------------------------------------------------------------------ +# QUERY TUNING +#------------------------------------------------------------------------------ + +# - Planner Method Configuration - + +#enable_async_append = on +#enable_bitmapscan = on +#enable_gathermerge = on +#enable_hashagg = on +#enable_hashjoin = on +#enable_incremental_sort = on +#enable_indexscan = on +#enable_indexonlyscan = on +#enable_material = on +#enable_memoize = on +#enable_mergejoin = on +#enable_nestloop = on +#enable_parallel_append = on +#enable_parallel_hash = on +#enable_partition_pruning = on +#enable_partitionwise_join = off +#enable_partitionwise_aggregate = off +#enable_seqscan = on +#enable_sort = on +#enable_tidscan = on + +# - Planner Cost Constants - + +#seq_page_cost = 1.0 # measured on an arbitrary scale +#random_page_cost = 4.0 # same scale as above +#cpu_tuple_cost = 0.01 # same scale as above +#cpu_index_tuple_cost = 0.005 # same scale as above +#cpu_operator_cost = 0.0025 # same scale as above +#parallel_setup_cost = 1000.0 # same scale as above +#parallel_tuple_cost = 0.1 # same scale as above +#min_parallel_table_scan_size = 8MB +#min_parallel_index_scan_size = 512kB +#effective_cache_size = 4GB + +#jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables +#jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables +#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + +# - Genetic Query Optimizer - + +#geqo = on +#geqo_threshold = 12 +#geqo_effort = 5 # range 1-10 +#geqo_pool_size = 0 # selects default based on effort +#geqo_generations = 0 # selects default based on effort +#geqo_selection_bias = 2.0 # range 1.5-2.0 +#geqo_seed = 0.0 # range 0.0-1.0 + +# - Other Planner Options - + +#default_statistics_target = 100 # range 1-10000 +#constraint_exclusion = partition # on, off, or partition +#cursor_tuple_fraction = 0.1 # range 0.0-1.0 +#from_collapse_limit = 8 +#jit = on # allow JIT compilation +#join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan + + +#------------------------------------------------------------------------------ +# REPORTING AND LOGGING +#------------------------------------------------------------------------------ + +# - Where to Log - + +#log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, syslog, and eventlog, + # depending on platform. csvlog + # requires logging_collector to be on. + +# This is used when logging to stderr: +#logging_collector = off # Enable capturing of stderr and csvlog + # into log files. Required to be on for + # csvlogs. + # (change requires restart) + +# These are only used if logging_collector is on: +#log_directory = 'log' # directory where log files are written, + # can be absolute or relative to PGDATA +#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, + # can include strftime() escapes +#log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation +#log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. +#log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. +#log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. + +# These are relevant when logging to syslog: +#syslog_facility = 'LOCAL0' +#syslog_ident = 'postgres' +#syslog_sequence_numbers = on +#syslog_split_messages = on + +# This is only relevant when logging to eventlog (Windows): +# (change requires restart) +#event_source = 'PostgreSQL' + +# - When to Log - + +#log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + +#log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + +#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + +# - What to Log - + +#debug_print_parse = off +#debug_print_rewritten = off +#debug_print_plan = off +#debug_pretty_print = on +#log_autovacuum_min_duration = -1 # log autovacuum activity; + # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. +#log_checkpoints = off +#log_connections = off +#log_disconnections = off +#log_duration = off +#log_error_verbosity = default # terse, default, or verbose messages +#log_hostname = off +#log_line_prefix = '%m [%p] ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %P = process ID of parallel group leader + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %Q = query ID (0 if none or not computed) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' +#log_lock_waits = off # log lock waits >= deadlock_timeout +#log_recovery_conflict_waits = off # log standby recovery conflict waits + # >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_statement = 'none' # none, ddl, mod, all +#log_replication_commands = off +#log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files +log_timezone = 'Etc/UTC' + + +#------------------------------------------------------------------------------ +# PROCESS TITLE +#------------------------------------------------------------------------------ + +#cluster_name = '' # added to process titles if nonempty + # (change requires restart) +#update_process_title = on + + +#------------------------------------------------------------------------------ +# STATISTICS +#------------------------------------------------------------------------------ + +# - Query and Index Statistics Collector - + +#track_activities = on +#track_activity_query_size = 1024 # (change requires restart) +#track_counts = on +#track_io_timing = off +#track_wal_io_timing = off +#track_functions = none # none, pl, all +#stats_temp_directory = 'pg_stat_tmp' + + +# - Monitoring - + +#compute_query_id = auto +#log_statement_stats = off +#log_parser_stats = off +#log_planner_stats = off +#log_executor_stats = off + + +#------------------------------------------------------------------------------ +# AUTOVACUUM +#------------------------------------------------------------------------------ + +#autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. +#autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) +#autovacuum_naptime = 1min # time between autovacuum runs +#autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums +#autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze +#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum +#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze +#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) +#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay +#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + +#------------------------------------------------------------------------------ +# CLIENT CONNECTION DEFAULTS +#------------------------------------------------------------------------------ + +# - Statement Behavior - + +#client_min_messages = notice # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error +#search_path = '"$user", public' # schema names +#row_security = on +#default_table_access_method = 'heap' +#default_tablespace = '' # a tablespace name, '' uses the default +#default_toast_compression = 'pglz' # 'pglz' or 'lz4' +#temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace +#check_function_bodies = on +#default_transaction_isolation = 'read committed' +#default_transaction_read_only = off +#default_transaction_deferrable = off +#session_replication_role = 'origin' +#statement_timeout = 0 # in milliseconds, 0 is disabled +#lock_timeout = 0 # in milliseconds, 0 is disabled +#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled +#idle_session_timeout = 0 # in milliseconds, 0 is disabled +#vacuum_freeze_table_age = 150000000 +#vacuum_freeze_min_age = 50000000 +#vacuum_failsafe_age = 1600000000 +#vacuum_multixact_freeze_table_age = 150000000 +#vacuum_multixact_freeze_min_age = 5000000 +#vacuum_multixact_failsafe_age = 1600000000 +#bytea_output = 'hex' # hex, escape +#xmlbinary = 'base64' +#xmloption = 'content' +#gin_pending_list_limit = 4MB + +# - Locale and Formatting - + +datestyle = 'iso, mdy' +#intervalstyle = 'postgres' +timezone = 'Etc/UTC' +#timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode +#client_encoding = sql_ascii # actually, defaults to database + # encoding + +# These settings are initialized by initdb, but they can be changed. +lc_messages = 'en_US.utf8' # locale for system error message + # strings +lc_monetary = 'en_US.utf8' # locale for monetary formatting +lc_numeric = 'en_US.utf8' # locale for number formatting +lc_time = 'en_US.utf8' # locale for time formatting + +# default configuration for text search +default_text_search_config = 'pg_catalog.english' + +# - Shared Library Preloading - + +#local_preload_libraries = '' +#session_preload_libraries = '' +#shared_preload_libraries = '' # (change requires restart) +#jit_provider = 'llvmjit' # JIT library to use + +# - Other Defaults - + +#dynamic_library_path = '$libdir' +#extension_destdir = '' # prepend path when loading extensions + # and shared objects (added by Debian) +#gin_fuzzy_search_limit = 0 + + +#------------------------------------------------------------------------------ +# LOCK MANAGEMENT +#------------------------------------------------------------------------------ + +#deadlock_timeout = 1s +#max_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) +#max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 +#max_pred_locks_per_page = 2 # min 0 + + +#------------------------------------------------------------------------------ +# VERSION AND PLATFORM COMPATIBILITY +#------------------------------------------------------------------------------ + +# - Previous PostgreSQL Versions - + +#array_nulls = on +#backslash_quote = safe_encoding # on, off, or safe_encoding +#escape_string_warning = on +#lo_compat_privileges = off +#quote_all_identifiers = off +#standard_conforming_strings = on +#synchronize_seqscans = on + +# - Other Platforms and Clients - + +#transform_null_equals = off + + +#------------------------------------------------------------------------------ +# ERROR HANDLING +#------------------------------------------------------------------------------ + +#exit_on_error = off # terminate session on any error? +#restart_after_crash = on # reinitialize after backend crash? +#data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) +#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) + + +#------------------------------------------------------------------------------ +# CONFIG FILE INCLUDES +#------------------------------------------------------------------------------ + +# These options allow settings to be loaded from files other than the +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. + +#include_dir = '...' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file + + +#------------------------------------------------------------------------------ +# CUSTOMIZED OPTIONS +#------------------------------------------------------------------------------ + +# Add settings for extensions here diff --git a/qbittorrent/qBittorrent/qBittorrent-data.conf b/qbittorrent/qBittorrent/qBittorrent-data.conf new file mode 100644 index 0000000..b7f6ca2 --- /dev/null +++ b/qbittorrent/qBittorrent/qBittorrent-data.conf @@ -0,0 +1,2 @@ +[Stats] +AllStats=@Variant(\0\0\0\x1c\0\0\0\x2\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0U\0L\0\0\0\x4\0\0\0\0\0\xd5U\xc8\0\0\0\x12\0\x41\0l\0l\0t\0i\0m\0\x65\0\x44\0L\0\0\0\x4\0\0\0\0\0\xb9k\xc4) diff --git a/qbittorrent/qBittorrent/qBittorrent.conf b/qbittorrent/qBittorrent/qBittorrent.conf new file mode 100644 index 0000000..61968ae --- /dev/null +++ b/qbittorrent/qBittorrent/qBittorrent.conf @@ -0,0 +1,55 @@ +[Application] +FileLogger\Age=1 +FileLogger\AgeType=1 +FileLogger\Backup=true +FileLogger\DeleteOld=true +FileLogger\Enabled=true +FileLogger\MaxSizeBytes=66560 +FileLogger\Path=/config/qBittorrent/logs + +[AutoRun] +enabled=false +program= + +[BitTorrent] +Session\AddTorrentStopped=false +Session\DefaultSavePath=/downloads/ +Session\ExcludedFileNames= +Session\Port=6881 +Session\QueueingSystemEnabled=true +Session\SSL\Port=48200 +Session\ShareLimitAction=Stop +Session\TempPath=/downloads/incomplete/ + +[Core] +AutoDeleteAddedTorrentFile=Never + +[LegalNotice] +Accepted=true + +[Meta] +MigrationVersion=8 + +[Network] +Cookies=@Invalid() +PortForwardingEnabled=false +Proxy\HostnameLookupEnabled=false +Proxy\Profiles\BitTorrent=true +Proxy\Profiles\Misc=true +Proxy\Profiles\RSS=true + +[Preferences] +Connection\PortRangeMin=6881 +Connection\UPnP=false +Downloads\SavePath=/downloads/ +Downloads\TempPath=/downloads/incomplete/ +General\Locale=en +MailNotification\req_auth=true +WebUI\Address=* +WebUI\Password_PBKDF2="@ByteArray(lj/lkPqF1eQSvo0TpEAAJg==:FCI7qC/eMj8z19HCLfbVsa26Pjap0WX8bGaL+j7eeuM5cJTxkVXuWrGndRhzLyY4jKiroTleQiz3me/xi1nCrg==)" +WebUI\Port=9092 +WebUI\ServerDomains=* + +[RSS] +AutoDownloader\DownloadRepacks=true +AutoDownloader\SmartEpisodeFilter=s(\\d+)e(\\d+), (\\d+)x(\\d+), "(\\d{4}[.\\-]\\d{1,2}[.\\-]\\d{1,2})", "(\\d{1,2}[.\\-]\\d{1,2}[.\\-]\\d{4})"