Run new astyle formatter against all the examples

examples/Autoscroll/Autoscroll.ino

@@ -44,7 +44,7 @@ LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
 
 void setup() {
   // set up the LCD's number of columns and rows:
-  lcd.begin(16,2);
+  lcd.begin(16, 2);
 }
 
 void loop() {
@@ -52,12 +52,12 @@ void loop() {
   lcd.setCursor(0, 0);
   // print from 0 to 9:
   for (int thisChar = 0; thisChar < 10; thisChar++) {
-   lcd.print(thisChar);
+    lcd.print(thisChar);
-   delay(500);
+    delay(500);
   }
 
   // set the cursor to (16,1):
-  lcd.setCursor(16,1);
+  lcd.setCursor(16, 1);
   // set the display to automatically scroll:
   lcd.autoscroll();
   // print from 0 to 9:

examples/Blink/Blink.ino

@@ -53,7 +53,7 @@ void loop() {
   // Turn off the blinking cursor:
   lcd.noBlink();
   delay(3000);
-   // Turn on the blinking cursor:
+  // Turn on the blinking cursor:
   lcd.blink();
   delay(3000);
 }

examples/Cursor/Cursor.ino

@@ -54,7 +54,7 @@ void loop() {
   // Turn off the cursor:
   lcd.noCursor();
   delay(500);
-   // Turn on the cursor:
+  // Turn on the cursor:
   lcd.cursor();
   delay(500);
 }

examples/Display/Display.ino

@@ -54,7 +54,7 @@ void loop() {
   // Turn off the display:
   lcd.noDisplay();
   delay(500);
-   // Turn on the display:
+  // Turn on the display:
   lcd.display();
   delay(500);
 }

examples/HelloWorld/HelloWorld.ino

@@ -53,6 +53,6 @@ void loop() {
   // (note: line 1 is the second row, since counting begins with 0):
   lcd.setCursor(0, 1);
   // print the number of seconds since reset:
-  lcd.print(millis()/1000);
+  lcd.print(millis() / 1000);
 }
 

examples/Scroll/Scroll.ino

@@ -70,8 +70,8 @@ void loop() {
     delay(150);
   }
 
-    // scroll 16 positions (display length + string length) to the left
+  // scroll 16 positions (display length + string length) to the left
-    // to move it back to center:
+  // to move it back to center:
   for (int positionCounter = 0; positionCounter < 16; positionCounter++) {
     // scroll one position left:
     lcd.scrollDisplayLeft();

examples/SerialDisplay/SerialDisplay.ino

@@ -41,8 +41,8 @@
 // initialize the library with the numbers of the interface pins
 LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
 
-void setup(){
+void setup() {
-    // set up the LCD's number of columns and rows: 
+  // set up the LCD's number of columns and rows:
   lcd.begin(16, 2);
   // initialize the serial communications:
   Serial.begin(9600);

examples/TextDirection/TextDirection.ino

@@ -1,40 +1,40 @@
-  /*
+/*
-  LiquidCrystal Library - TextDirection
+LiquidCrystal Library - TextDirection
 
- Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
+Demonstrates the use a 16x2 LCD display.  The LiquidCrystal
- library works with all LCD displays that are compatible with the 
+library works with all LCD displays that are compatible with the
- Hitachi HD44780 driver. There are many of them out there, and you
+Hitachi HD44780 driver. There are many of them out there, and you
- can usually tell them by the 16-pin interface.
+can usually tell them by the 16-pin interface.
 
- This sketch demonstrates how to use leftToRight() and rightToLeft()
+This sketch demonstrates how to use leftToRight() and rightToLeft()
- to move the cursor.
+to move the cursor.
 
- The circuit:
+The circuit:
- * LCD RS pin to digital pin 12
+* LCD RS pin to digital pin 12
- * LCD Enable pin to digital pin 11
+* LCD Enable pin to digital pin 11
- * LCD D4 pin to digital pin 5
+* LCD D4 pin to digital pin 5
- * LCD D5 pin to digital pin 4
+* LCD D5 pin to digital pin 4
- * LCD D6 pin to digital pin 3
+* LCD D6 pin to digital pin 3
- * LCD D7 pin to digital pin 2
+* LCD D7 pin to digital pin 2
- * LCD R/W pin to ground
+* LCD R/W pin to ground
- * 10K resistor:
+* 10K resistor:
- * ends to +5V and ground
+* ends to +5V and ground
- * wiper to LCD VO pin (pin 3)
+* wiper to LCD VO pin (pin 3)
 
- Library originally added 18 Apr 2008
+Library originally added 18 Apr 2008
- by David A. Mellis
+by David A. Mellis
- library modified 5 Jul 2009
+library modified 5 Jul 2009
- by Limor Fried (http://www.ladyada.net)
+by Limor Fried (http://www.ladyada.net)
- example added 9 Jul 2009
+example added 9 Jul 2009
- by Tom Igoe 
+by Tom Igoe
- modified 22 Nov 2010
+modified 22 Nov 2010
- by Tom Igoe
+by Tom Igoe
 
- This example code is in the public domain.
+This example code is in the public domain.
 
- http://arduino.cc/en/Tutorial/LiquidCrystalTextDirection
+http://arduino.cc/en/Tutorial/LiquidCrystalTextDirection
 
- */
+*/
 
 // include the library code:
 #include <LiquidCrystal.h>

examples/setCursor/setCursor.ino

@@ -49,7 +49,7 @@ LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
 
 void setup() {
   // set up the LCD's number of columns and rows:
-  lcd.begin(numCols,numRows);
+  lcd.begin(numCols, numRows);
 }
 
 void loop() {
@@ -60,7 +60,7 @@ void loop() {
       // loop over the rows:
       for (int thisRow = 0; thisRow < numCols; thisRow++) {
         // set the cursor position:
-        lcd.setCursor(thisRow,thisCol);
+        lcd.setCursor(thisRow, thisCol);
         // print the letter:
         lcd.write(thisLetter);
         delay(200);