Changed pins to match schematics on project site

examples/tm1638_one_module_example/tm1638_one_module_example.pde

@@ -18,8 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <TM1638.h>
 
-// define a module on data pin 3, clock pin 2 and strobe pin 4
-TM1638 module(3, 2, 4);
+// define a module on data pin 3, clock pin 9 and strobe pin 7
+TM1638 module(8, 9, 7);
 
 void setup() {
   // display a hexadecimal number and set the left 4 dots

examples/tm1638_scrolling_modules_example/tm1638_scrolling_modules_example.pde

@@ -22,10 +22,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // define a modules
 TM1638 modules[] = {
-	TM1638(3, 2, 4),
-	TM1638(3, 2, 5),
-	TM1638(3, 2, 6),
-	TM1638(3, 2, 7)
+	TM1638(8, 9, 7),
+	TM1638(8, 9, 6),
+	TM1638(8, 9, 5),
+	TM1638(8, 9, 4)
 };
 
 void setup() {

examples/tm1638_two_modules_example/tm1638_two_modules_example.pde

@@ -24,9 +24,9 @@ const byte hello[] = {
 };
 
 // define the first module
-TM1638 module1(3, 2, 4);
+TM1638 module1(8, 9, 7);
 // to chain modules, use the same clk and data - just specify a different strobe pin
-TM1638 module2(3, 2, 5);
+TM1638 module2(8, 9, 6);
 
 unsigned long value = 0L;
 boolean state = true;