102 lines
3.0 KiB
Plaintext
102 lines
3.0 KiB
Plaintext
/*
|
|
TM1638.h - Library for TM1638.
|
|
|
|
Copyright (C) 2011 Ricardo Batista <rjbatista at gmail dot com>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the version 3 GNU General Public License as
|
|
published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "TM1638.h"
|
|
|
|
// hello segments for display
|
|
const byte hello[] = {
|
|
0b00000000, 0b01110110, 0b01111001, 0b00111000, 0b00111000, 0b00111111, 0b00000000, 0b00000000
|
|
};
|
|
|
|
// define the first module
|
|
TM1638 module1(8, 9, 7);
|
|
// to chain modules, use the same clk and data - just specify a different strobe pin
|
|
TM1638 module2(8, 9, 6);
|
|
|
|
unsigned long value = 0L;
|
|
boolean state = true;
|
|
|
|
void setup()
|
|
{
|
|
// display the hello segments on module 1
|
|
module1.setDisplay(hello);
|
|
// display the hello segments on module 2
|
|
module2.setDisplay(hello);
|
|
|
|
// light the lower 5 red LEDs and the top 5 green LEDs
|
|
module1.setLEDs(0b00011111 | 0b11111000 << 8);
|
|
|
|
// light the 3rd red LED
|
|
module2.setLED(TM1638_COLOR_RED, 3);
|
|
// light the 5th green LED
|
|
module2.setLED(TM1638_COLOR_GREEN, 5);
|
|
// light the 7th red and green LEDs
|
|
module2.setLED(TM1638_COLOR_RED | TM1638_COLOR_GREEN, 7);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
byte key1, key2;
|
|
|
|
// read the buttons from the first module
|
|
key1 = module1.getButtons();
|
|
// read the buttons from the second module
|
|
key2 = module2.getButtons();
|
|
|
|
// both pressed
|
|
if (key1 != 0 && key2 != 0) {
|
|
value = 0;
|
|
|
|
// set the display to 0 on both modules if they have buttons pressed simultaneously
|
|
module1.setDisplayToHexNumber(value, 0b10101010);
|
|
module2.setDisplayToDecNumber(value, 0b01010101);
|
|
} else {
|
|
// check the first module buttons
|
|
if (key1 != 0) {
|
|
// show the pressed buttons of the first module on its display
|
|
module2.setDisplayToBinNumber(key1, 0);
|
|
// and on the LEDs
|
|
module1.setLEDs(key1);
|
|
|
|
// check to see if it's the last button pressed
|
|
if (key1 & 128) {
|
|
// toggle the display state on/off
|
|
state = !state;
|
|
delay(200); // just wait for button up
|
|
}
|
|
|
|
// set the intensity and display state
|
|
module1.setupDisplay(state, key1 >> 1);
|
|
}
|
|
|
|
// check the second module buttons
|
|
if (key2 != 0) {
|
|
// just add it to the display value
|
|
value += key2;
|
|
|
|
// display it as an hexadecimal on the first module
|
|
module1.setDisplayToHexNumber(value, 0b10101010);
|
|
// and as a decimal on the second module
|
|
module2.setDisplayToDecNumber(value, 0b01010101);
|
|
|
|
// light the LEDs
|
|
module2.setLEDs(key2 << 8);
|
|
}
|
|
}
|
|
}
|